CRC Ultra High Strength Aerosol Adhesive 550ml - Porous Non Porous Surface

Product Description

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Copyright © 2014 - 2025 Superspares. All rights reserved.

Contents : 1 x CRC Ultra High Strength Aerosol Adhesive 550ml

Parameters:

Appearance: VISCOUS CLEAR LIQUID (AEROSOL DISPENSED)
Country of Manufacture: New Zealand
Flammability: Extremely flammable
Flash Point: < 0°C
Unit Depth (mm): 65
Unit Dimensions: 257H 65W 65D mm
Unit Height (mm): 257
Unit Size: 550ml
Unit Width (mm): 65

CRC UHS is an ultra high strength contact adhesive which gives an immediate and permanent bond on a wide variety of surfaces. It is formulated to give low soak, cure fast, dry clear and be non-staining. It has high heat resistance and is suitable on porous and non-porous surfaces making it ideal for a wide variety of applications, where permanent, high strength bonds are essential. CRC UHS uses a unique resin system making it resistant to breakdown from plasticiser migration. The UHS aerosol is fitted with a variable nozzle, which allows controlled, accurate spraying, reducing product wastage and limiting over-spray.

Applications: Spray an even layer of adhesive to both surfaces. Adjust nozzle for width of spray required. Allow solvents to evaporate away. Between 5-10 minutes, the solvent should have evaporated and the adhesive should be tacky enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are sticky to the touch, without transferring to your finger, they are ready to bond together. On non porous surfaces it is imperative that no solvent is trapped. Position components accurately, as when contact is made, the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl-flooring roller, provides good direct pressure. A dry adhesive surface may be reactivated by wiping over with solvent.

Ultra High Strength ÿ Instant Permanent Contact Bond High Heat Resistance ÿ Up to 75¡«C Plasticiser Safe ÿ Resistant to breakdown from plasticiser migration Easy to Use ÿ No clamping required Variable Nozzle ÿ Allows controlled, accurate spraying and a variable spray width

In 1958, CRC began in a Pennsylvania garage as Corrosion Reaction Consultants, introducing its first product: CRC Corrosion Inhibitor, a multi-purpose lubricant. By 1969, manufacturing had commenced in Australia, and in 1973, operations began in New Zealand. We pride ourselves as being the leader in product quality, performance and regulatory compliance. Our innovative research and development team continually develops new and improved products to help you do your job faster, easier and safer.