CRC F3 Thixotropic High Strength Contact Adhesive 500ml - Non-Spill & Non-Drip

Product Description

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.
Copyright © 2014 - 2025 Superspares. All rights reserved.

Contents : 1 x CRC F3 Thixotropic High Strength Contact Adhesive 500ml

CRC F3 is a thixotropic, high strength contact adhesive. It is formulated to be non-spill and non-drip, giving greater control of application and better coverage. This gel feature makes it ideal for vertical and ceiling applications and for bonding onto porous surfaces, e.g. Gib board. CRC F3 will not soak in as other liquid adhesives do, giving excellent results on porous surfaces such as the end grain of particle board. CR F3 has good resistance to heat, water, acids and alkalis, essential for a wide variety of commercial applications.

Applications: Use a straight edge or a notched trowel or the scraper provided. Apply an even layer of adhesive to both surfaces. Between 10-20 minutes the solvent should have evaporated and the adhesive should be tacky enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are sticky to the touch, without transferring to your finger, they are ready to bond together. It is imperative that no solvent is trapped between Position components accurately, as when contact is made the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl flooring roller, provides good direct pressure.

Thixotropic - Ideal for vertical and porous surfaces Non-spill, Non-drip - Greater control of application and better coverage Resilient - Good resistance to heat, water, acids and alkalis

In 1958, CRC began in a Pennsylvania garage as Corrosion Reaction Consultants, introducing its first product: CRC Corrosion Inhibitor, a multi-purpose lubricant. By 1969, manufacturing had commenced in Australia, and in 1973, operations began in New Zealand. We pride ourselves as being the leader in product quality, performance and regulatory compliance. Our innovative research and development team continually develops new and improved products to help you do your job faster, easier and safer.