Penrite Full Syn EDS 10 SAE 10W-40 ACEA A3/B4 API SP Engine Oil 10L - EDS10010

Product Description

Shipping of items from this product category may incur additional shipping charges especially to non-metro areas.

Copyright © 2014 - 2026 Superspares. All rights reserved.

Contents :

1 x Penrite Full Synthetic EDS 10 SAE 10W-40 ACEA A3/B4 API SP Engine Oil 10L

Part Number : EDS10010

Specifics :

• Base Oil: Full Synthetic
• Viscosity: SAE 10W-40
• For Petrol / E10, Diesel, LPG vehicles
• Key Specifications: ACEA A3/B4, API SP, JASO MA2.

Typical Data :
Density at 15°C, kg/L : 0.862
Viscosity, Kinematic, cSt at 40°C : 98
Viscosity, Kinematic, cSt at 100°C : 14.6
Viscosity Index : 156
Cold Cranking Viscosity, cP at -25°C : 5625
Ca content, Mass % : 0.132
Zinc, Mass % : 0.106
Phosphorus, Mass % : 0.097
Sulphated Ash, Mass % : 1.23
Total Base Number (TBN) : 11.3

Product Description

EDS 10 is a premium, non friction modified, SAE 10W-40 engine oil. It contains a FULL ZINC anti-wear additive pack and uses a combination of the latest additive technology and a low shear rate viscosity modifier, to ensure complete protection against wear, corrosion, oil oxidation, piston deposits and sludge under all conditions.

EDS 10 meets API SP, ACEA A3/B4 and JASO MA2 as well as many other manufacturers specifications

Note:EDS 10 replaces Full Synthetic 10W-40

Application

EDS 10 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines.

EDS 10 can be used where SAE 10W-30 & SAE 10W-40 grade oils are recommended in the owner's handbook. It can be used where ACEA A3/B3 or A3/B4 is recommended and also where API SP and previous specifications SN (2010-2020), SM (2004-2010), SL (2001-2004), SJ (1998-2000) or earlier specifications are recommended. It is suitable for use in many Diesel and LPG powered vehicles requiring an engine oil meeting API CF or older specifications. It is not recommended for use in diesel vehicles fitted with a DPF (Diesel Particulate Filter).

Vehicles and Fuel Type

EDS 10 is suitable for use in passenger cars, 4WDs, motorcycles & light commercial vehicles. It is suitable for use in four stroke motorcycles with wet clutch. It is compatible with Petrol/LPG (Dual Fuel), E10, Diesel (Non-DPF) and most other conventional fuels. If using with E85 fuel, Penrite recommend more frequent oil change periods.

Note:when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.

Please Note:

A 58mm cap with pouring tap is available to fit 7, 10 & 20 litre packs.

Benefits

• Engineered to provide COMPLETE ENGINE PROTECTION
• FULL ZINC anti-wear additive package for ultimate engine wear protection
• LATEST oil specification technology for maximum wear protection, minimum sludge formation & reduced piston deposits
• ENHANCED LSPI (Low Speed Pre-Ignition) protection
• BETTER wear protection for "Idle Stop" engines
• REDUCED Turbo Charger deposits
• IMPROVED oxidation and deposit control and aeration
• FULL SYNTHETIC base oil for outstanding protection and longer life
• LOW SHEAR VI Improvers reduce oil consumption and maintains oil pressure
• Longer engine life by reducing formation of high temperature engine deposits
• Proven and trusted protection for performance engines

Product Performance Levels

ACEA A3/B4
API SP
BMW LL-01
BMW Longlife-01
JASO MA2
MB 229.3.
MB 229.5.
VW 501 01
VW 502 00

Suitable for Use where Specifications below are required

ACEA A3/B3
API SJ
API SJ/CF
API SL
API SL/CF
API SM
API SM/CF
API SN Plus
API SN/CF