Penrite Petrol Engine Boost+ Pro Series Oil Booster Additive 500ML PSPEB0005

Product Description

Shipping of items from this product category may incur additional shipping charges especially to non-metro areas.

Contents :

1 x Penrite Petrol Engine Boost+ 500ML

Part Number : PSPEB0005

Key Information :

• For Petrol / E10, Racing, E85, LPG, Hybrid vehicles
• Increases octane rating by up to 3.0
• Increased wear protection (wear reduction of 3% in laboratory tests)
• Reduces friction by up to 10% (shown in laboratory HFRR test)
• Decreases friction as temperature increases (tests results compared at 70¡ãC, 100¡ãC and 130¡ãC)

Benefits

• Increases octane rating by up to 3.0
• Increased wear protection (wear reduction of 3% in laboratory tests)
• Reduces friction by up to 10% (shown in laboratory HFRR test)
• Decreases friction as temperature increases (tests results compared at 70¡ãC, 100¡ãC and 130¡ãC)
• Better power at oil operating temperature in severe competition conditions
• Better fuel economy for on road applications
• Base DI pack maintains the balance of the base engine oil performance
• Compatible with mineral, semi synthetic and full synthetic engine oils.
• Will not harm exhaust catalysts

Application

PETROL ENGINE BOOST + is designed for use in modern and classic 4, 6 & 8+ cylinder, multi cam, multi-valve including VVT, naturally aspirated, supercharged & turbocharged engines. It can be used in high performance and standard engines as well as in competition and normal on/off road use. It is not suitable for use 2 Stroke engines.

PETROL ENGINE BOOST + is ideal for use with full synthetic, semi synthetic or mineral based high performance engine oils. It is very suitable for use in low and mid SAPS, fuel economy petrol engine oils for modern low emission engines. Its advanced formula will not harm exhaust catalysts

One 500ml bottle adds the following approximate PPM from the booster pack to the engine oil.

One 500ml bottle in a 6L sump is sufficient to take a typical mid SAPs petrol engine oil to a zinc level of about 1510ppm, without increasing the levels of Phosphorus, Sulphated Ash or Sulphur.