Penrite Pink OEM Coolant Premix Formulated for Toyota Vehicles 1L COOLPINKPMX001

Product Description

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Shipping of items from this product category may incur additional shipping charges especially to non-metro areas.

Copyright © 2014 - 2026 Superspares. All rights reserved.

Contents :

1 x Penrite Pink OEM Coolant Premix 1L

Part Number : COOLPINKPMX001

Specifics :

• 12 Year or 800,000km drain intervals if used and maintained at 50%
• Suitable for most Asian vehicles including Toyota & LEXUS
• Compatible with plastics, rubbers and seals
• Protects all internal surfaces from corrosion, including aluminium
• Premixed at 50% concentration and ready to use
• Amine, Borate, Silicate & Nitrite free

Typical Data :
Colour : PINK
Density at 20°C, kg/L (50% Concentration / Premix) : 1.07
Glycol Content, g/L (Premix 50%) : 513

Product Description

Pink OEM Coolant Premix is a Type "A" Ethylene glycol, Anti-Freeze Anti-Boil formulated for Toyota vehicles (from 2018). It uses a technically advanced P-OAT (P-OAT - Phosphate Organic Acid Technology) based inhibitor system that is Amine, Borate, Silicate and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 12 years or 800,000km.

Application

Pink OEM Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where P-OAT (Phosphate OAT) type anti-freeze / anti-boil and anti-corrosion properties are required. It is also suitable for use in Electric & Hybrid Vehicles (EV, BEV, HEV & PHEV) for cooling of the internal combustion engine and/or battery thermal management systems.

Pink OEM Coolant Premix is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment.

Pink OEM Coolant Premix provides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used for the cooling system construction. It is effective in all cast iron aluminium engines that are under load or used in extreme hot and cold climates. It may be used in all types of vehicles that use pink, red or purple coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.

Pink OEM Coolant Premix is a 50% concentration formulation and is ready to use directly from the container. It is pre-mixed with de-mineralised water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up or is safe to mix with compatible Type A coolant. Penrite recommend that a 50% concentration level should be maintained for maximum, performance and longevity of the coolant and protection of the cooling system.

Coolant Flushing

Penrite recommend flushing the cooling system prior to a complete service refill. Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.

Please Note:

A 58mm cap with pouring tap is available to fit 20 litre packs.

Product Performance Levels

AFNOR NFR 15-601
AS 2108-2004 Type A
ASTM 3306
BS 6580:2010
CUNA NC 956-16
JIS K 2234:2006
ONORM V 5123
SANS 1251:2005