SP Tools 6/12V 2.0A Smart Battery/Trickle Charger - 8 Stage Multi Volt

Product Description

Note: eBay's compatibility table is not accurate in some cases. Please refer to the following information we have provided for you.

Copyright © 2014 - 2026 Superspares. All rights reserved.

Contains: SP Tools 6/12V 2.0A Smart Battery/Trickle Charger This trickle charger is perfect for long-term maintenance, it automatically switches to float mode to prevent overcharging and restarts again once the battery voltage drops over time. It's ideal for maintaining batteries in equipment or vehicles that aren't used regularly.

Specifications:

CHARGING MODES
Three-stage charging of lithium battery
Eight-stage charging of lead-acid batteries
WARNING: Batteries contain corrosive liquid. Always wear approved gloves and goggles when handling batteries or battery acid. If battery acid contacts skin, wash off immediately and contact a doctor for further advice.

• Overcharge protection, protecting the battery from damage due to overcharging
• Reverse polarity, short circuit, high temperature & voltage error protection
• Dead battery detection
• Optimally designed charging cycle designed for standard lead acid (including WET/GEL/MF/CA/EFB), AGM & lithium batteries with BMS only (BMS = Battery Management System)
• Built-in microchip charging control and monitoring system
• INCLUDES QUICK CONNECT HARNESS - Easily switch between using battery clamps and terminal ring quick connect harness.

Warranty Policy

SP AUTOMOTIVE SPECIALITY TOOLS - 12 MONTH WARRANTY

SP Automotive Speciality Tools are covered against manufacturing defects or faulty materials. This warranty does not cover overloading, abuse, misuse and normal wear and tear. All SP Automotive Speciality Tools are designed and manufactured for specific purposes and if not used for that intended purpose they will not be covered by the 12 month warranty. This 12 month warranty is in addition to what is covered in the Trade Practices Act (Aust), all state and territory laws and regulations and the Fair Trading Act (NZ). Tools that fail due to manufacturing defects or faults may be returned to a SP Automotive Speciality Tool authorised dealer for repair or replacement at the sole discretion of Austech Industries Pty Ltd.