Trupro 25mm lift Control Arm + Diff Drop Kit for Mitsubishi Triton MQ MR 15-23

About Control Arm

Control arms serve as a pivot point for the suspension to move up and down, allowing the wheels to move freely and absorb the shock of bumps in the road,rather than being passed on to the frame of the vehicle and its passengers.

Always making sure your control arm is in top condition, you can avoid costly repairs and ensure that your car is running smoothly.

- allows for better articulation of the ball stud.

Repositioned Ball Joint Aperture

-maintains camber.

OE Spec Ball Joint Aperture

- takes standard factory or aftermarket ball joint.

OE Spec Bushing Aperture

- takes standard factory or aftermarket bushings.

Black E-Coating

- maximum durability, rust prevention and discreet installation.

About Diff Drop Kit

When lifting IFS Vehicles, the Constant Velocity (CV) joints are put on an increased angle. This increased angle of the CV joint during operation can accelerate the wear on the joint, as well as putting additional stress on the CV boots leading to splitting and eventually premature failure of the CV. This wear is accelerated further if larger (wider) wheels and tyres are fitted.

• Application specific
• Supplied complete
• Corrects the geometry on the front driveshaft and CV's
• Lowers the front diff by approx. 30mm
• Reduces the angles the CV joints need to operate on
• Avoids the expensive replacements of CV's and boots

The Trupro Diff Drop Kits are application specific and supplied complete to get the job done. The bolt on kit corrects the geometry on the front driveshaft and CV's, lowering the front diff by approx. 30mm, thus reducing the angles the CV joints need to operate on, and avoiding the expensive replacements of CV's and boots.