Penrite Lightning Walnut Hand Scrub Wall Dispenser with Bracket LTWSD

Product Description

Shipping of items from this product category may incur additional shipping charges especially to non-metro areas.

Contents :

1 x Penrite Lightning Walnut Hand Scrub Wall Dispenser

Part Number : LTWSD

Specifics :

• Heavy duty to clean and remove soil and grime
• Free from harsh solvents
• A combination of walnut shells and pumice provide enhanced cleaning
• Contains skin conditioners to leave hands smooth and conditioned
• Rainforest fragrance
• Biodegradable

Feature

Walnut Hand Scrub contains all natural abrasives with no harsh solvents. Formulated with surfactants, walnut shells, and pumice to help exfoliate the skin and remove even the toughest soils. It contains mild cleansers and skin conditioners that are gentle and leave hands clean and smooth. It is a heavy-duty, biodegradable hand cleaner with a pleasant rainforest fragrance.

Application

Walnut Hand Scrub is applied directly to the hands and is highly effective at removing grease oil, heavy grime, and many other types of soils. It is suited for use in most commercial and domestic areas where a heavy duty hand cleaner is needed. It can be used for automotive workshops and service centres, marine, industrial, agriculture, mining, and forestry industries.

How to Use

1.Pump product from dispenser directly onto hands
2.Rub into hands and between the fingers and nails for 30 - 60 seconds
3.Rinse off with clean running water
4.After rinsing apply Lightning Revive Skin Conditioner for re-hydration and conditioning of the hands

Dispenser Mounting Instructions:

Tape Mounting

Apply the bracket to a flat, clean dry surface only.

1.Remove the backing and mount bracket in the desired location allowing a minimum of 3" between the bottom of the back and countertop. Allow 5" above the top of the bracket for 2L bladder, and 10" above the top for the 4L bladder.
2.Press the inside back panel of the bracket for 30 seconds. Load soap bladder.

Screw Mounting

Should molly bolts be required, poke holes through the tape mounting to mark placement before removing the backing tape.

1.Follow step 1 of the tape mounting instructions. Hold the dispenser in place while securing it with screws.
2.After securing, load soap bladder.